How to use Shizuku to mod ADB without root on any Android device

There was a time when modifying an Android device seemed to be a daily occurrence. Users have hired their Android devices to make up for the lack of features. But as Google continues to add new options and settings to Android with each passing year, many don’t seem to feel the need to use tweaks anymore.

Today, it’s still mostly experienced users who tweak their devices, but that’s only because it requires full root access to make it happen. Shizuku’s app is changing that, and hopefully, it’ll bring some new and old depositors back into the scene.

Shizuku uses a unique service that allows third-party applications to access system-wide application programming interfaces (APIs). It achieves this through the Android Debug Bridge (ADB) interface. ADB commands are somewhat limited in nature; However, integrating it with system APIs gives you a great deal of control. You also don’t have to worry about the Android rooting process to start using Shizuku. Follow along with the guide below to learn how to set up Shizuku your preferred way.

ANDROIDPOLICE TODAY’S VIDEO

Install the Shizuku app

Before you can use custom mods or mods on your Android device, you need to install the Shizuku app. Since there is no full root access built into the Shizuku service, using the ADB interface for the setup process is the next best option. Both options give you a great deal of additional control over your device, so you don’t get it wrong.

Set up your device by enabling developer options

Shizuku uses the hidden developer options on your Android device for the non-root methods in this guide, making it easy to enable them. If you don’t already have Developer Options enabled, you can do the following to turn them on:

  1. Open Settings application, then go to Systemabout the phone.
  2. Scroll down to File complete the number Section and quickly tap it 7 times to continue.
  3. Enter your PIN or password as needed.
  4. You will see a notification popup that states “You are now a developer!

The way to enable developer options can vary slightly depending on the manufacturer of your Android device. There are many of them on a similar site, but you may have to re-check your device. If you can find a file complete the number For your Android version, just tap on it quickly 7 times to enable developer options.

With Developer Options now enabled, you are done with the basic preparations. You can go to Shizuku setup.

How to set up Shizuku with wireless debugging

Starting with Android 11, Google added wireless debugging to the developer options, which allows you to perform ADB commands over Wi-Fi. Before that, the only other option was to connect your Android device to a computer via a USB cable.

The learning curve of the ADB interface is steep enough to prevent regular users from trying it themselves. However, the device’s wireless debugging feature makes it easy for anyone to use ADB commands – no computer or complicated setup required.

If you have Android 11 and above, you can use Shizuku with the wireless debugging feature by doing the following:

  1. Open the Shizuku app on the home screen, then scroll down to File Get started with wireless debugging Section.
  2. Click on conjugation button, then press Developer Options.
  3. Scroll down until you find a file wireless correction to choose.
  4. Click on Use wireless correction button.
  5. check the Always allow on this network Box.
  6. press Allow to enable the feature.
  7. press Pair the device with the pairing code To bring Pair with the device pop up.
  8. Enter the unique number 6 Wi-Fi pairing icon Just as it appears in Shizuku pairing code Notification text box.
  9. If necessary, swipe down on your status bar to the Shizuku notification, then tap Enter the pairing code.
    • Enter Wi-Fi pairing icon and press Sends Button to the right to confirm.
  10. You should see a file Successfully paired message if the pairing code is correct.
  11. Your device is now synced with the Shizuku app.

  12. Press the back arrow or gesture a few times until you return to the main screen of the Shizuku app.
    • You may have to scroll away from a file Successfully paired before you can do it.
  13. under Get started with wireless debugging section, click Started button to enable the service.
  14. Shizuku service will now start automatically on a new screen. It will be closed once the process is complete.
  15. Scroll to the top and make sure it shows File Shizuku is running with the version number followed by Asian Development Bank.


If I keep getting Searching for a wireless debugging service When enabling Shizuku, I ran into a slight problem. To fix this, tap Developer Options In the popup message, then disable and enable wireless correction Property. Press the back arrow to return to the Shizuku app, and the service should start.

Now that the Shizuku service is ready and waiting on your device, you can use it for any application or mod with official Shizuku support. You will have to start the service again after every reboot, so keep that in mind.

How to setup Shizuku with ADB commands on PC

The wireless patch feature is the best non-root method for most Shizuku users; However, some may still prefer to use the ADB interface through a computer. The setup process is more complicated than the wireless device debugging feature introduced with Android 11.

Once you get past the initial setup stage, it becomes a lot easier to use. To start Shizuku with ADB commands on PC, do the following:

  1. Download the latest Android SDK platform tools and extract the folder to your desktop for easy access.
    Platform-tools-folder-1

  2. Install Google USB drivers if needed (for Windows users).
  3. Maybe USB debugging on your Android device.
  4. open the Settings application, then go to SystemDeveloper Options.
  5. Scroll down and tap USB debugging to choose.
  6. press yes to enable.

  7. Connect your phone to your computer via a USB cable.
  8. On your Android device, confirm the computer’s fingerprint key by pressing Allow If necessary.
    • check the Always allow from this computer box to avoid any potential connection problems.
      rsa-fingerprint-flash-tool-1

  9. Open a command window or a terminal in a file tools platform Folder.
    • If you are using Windows, click the address bar in File tools platform folder, type poulticeand press Enters. This will open a new command window directly in File tools platform Folder.
      cmd platform tools open

  10. To double-check that your device is connected through ADB correctly, you can type adb . devices in the command window or terminal, then press Enter. Starting the ADB command should ask you to confirm your computer’s fingerprint key now if it didn’t appear earlier.
  11. You should see a unique device ID number below List of attached devicesletting you know that it is connected and known to the ADB interface.
  12. copy and paste adb shell sh /sdcard/android/data/moe.shizuku.privileged.api/start.sh in a command window or terminal, then press Enters.
    • On some platforms (especially Mac and Linux) ADB can be used Commands will likely have to be entered with “./” minus the quotes at first in order for them to work correctly.
  13. The command will enable Shizuku service on your Android device, and a file checkout with 0 status within a few seconds.
    • If you see this at the end, then you are fine – you have started the service successfully.
      Enable shizuku-adb-command

  14. Check the Shizuku app at the top, and you’ll see a file Shizuku is running with the version number followed by Asian Development Bank.


Just as with the wireless debugging feature, the Shizuku service must be reactivated every time you restart your device. These two methods rely on the ADB interface, which only makes temporary changes to your device without root access. Since you don’t need to restart very often these days, it probably won’t be an issue for most users.

If you want to use Shizuku in a terminal environment on Android, you can follow the in-app instructions by clicking Use Shizuku in terminal applications. You will be prompted to export and edit two files with the package name of your terminal application. Move them to a place where the station can find them. This is an advanced feature for people who like to work with a command line interface, so the average user probably won’t mess with it.

How to set up Shizuku with full root access

You don’t need root access to use Shizuku on your Android device; However, it is the fastest route you can take to enable the service. Not only is setup as simple as pressing a button, but you can also keep Shizuku service enabled after rebooting. If you want to use Shizuku with full root access, do the following:

  1. Open the Shizuku app on the home screen, then go to Start (for rooted devices) Section.
  2. Click on Started button to start the process.
  3. press Grant To grant appropriate root permissions upon request.
  4. The Shizuku service will start within a few seconds on a new screen, then shut down automatically when finished.
  5. Scroll to the top and check to see a file Shizuku is running with the version number followed by root.


If you don’t want to reactivate the Shizuku service after each restart, you can change that as needed. Click on Settings The cogwheel icon in the upper right corner, then enable start on boot (root) to choose. Once you do that, the Shizuku service will still be enabled after your device restarts. It will be easier for you to manage it from now on.


Now that you know how to set up Shizuku, you can start testing different mods for yourself – no root access is required to take advantage of its features. Soon, we should start seeing more unique apps and tweaks with native support for Shizuku’s service as well.


Sizing-Freestyle_Product-KV_02

Samsung’s latest screens and TVs may be more exciting than their phones

read the following


About the author